NEMA I & NEMA II Reels
The NEMA standard was adopted in the public interest and designed to eliminate misunderstandings between manufactures and purchaser. These reels tend to be used primarily for the shipping of power transmission cables. NEMA I & NEMA II are specifically designed for differing rated weight capacities.

For more information about George Evans Corporation NEMA I & NEMA II reels, or to contact a GEC sales representative, click here.

Flange
Diameter
Inches		 Traverse
Width
Inches		 Drum
Diameter
Inches		 Rated
Capacity
Pounds		 Arbor
Hole
Diameter
Inches		 Tire Size
Inches		 Drum
U.S.S.
Gauge		 Flange
Headsheet
U.S.S.
Gauge
42 24 24 1,956 3/3 1/4 RM 5/16 x 2 12 16
42 24 24 3,260 3/3 1/4 RM 1/2 x 2 12 16
48 24 24 3,072 3/3 1/4 RM 5/16 x 2 12 16
48 24 24 5,120 3/3 1/4 RM 1/2 x 2 12 16
54 32 32 4,464 3/3 1/4 RM 5/16 x 2 12 16
54 32 32 7,440 3/3 1/4 RM 1/2 x 2 12 16
60 32 32 6,360 3/3 1/4 RM 5/16 x 2 12 16
60 32 32 10,600 3/3 1/4 RM 1/2 x 2 12 16
66 32 36 7,680 3/3 1/4 RM 1/2 x 2 1/2 12 16
66 32 36 12,800 3/3 1/4 RM 1/2 x 2 1/2 10 16
72 36 40 10,260 3/3 1/4 RM 1/2 x 2 1/2 12 16
72 36 40 17,100 3/3 1/4 oRM 5/8 x 2 1/2 10 16
72 36 48 7,872 3/3 1/4 RM 1/2 x 2 1/2 12 16
72 36 48 13,120 3/3 1/4 oRM 5/8 x 2 1/2 10 16
78 36 48 10,752 3/3 1/4 oRM 5/8 x 2 1/2 12 16
78 36 48 17,920 3/3 1/4 +RM 3/4 x 2 1/2 10 14
84 36 42 13,608 5/5 1/4 RMT 3 x 7.5# 10 16
84 36 42 22,680 5/5 1/4 RMT 3 x 7.5# 10 14
84 45 42 17,004 5/5 1/4 RMT 3 x 7.5# 10 16
84 45 42 28,340 5/5 1/4 RMT 3 x 7.5# 8 14
90 45 42 21,036 5/5 1/4 RMT 3 x 7.5# 10 16
90 45 42 30,000 5/5 1/4 RMT 3 x 7.5# 8 14
90 45 56 15,216 5/5 1/4 RMT 3 x 7.5# 10 16
90 45 56 30,000 5/5 1/4 RMT 3 x 7.5# 8 14
90 54 56 18,252 5/5 1/4 RMT 3 x 7.5# 8 16
90 54 56 30,000 5/5 1/4 RMT 3 x 7.5# 7 14
96 60 42 26,000 5/5 1/4 RMT 3 x 7.5# 8 14
96 60 56 26,000 5/5 1/4 RMT 3 x 7.5# 8 14
96 60 56 40,000 5/5 1/4 RMT 3 x 7.5# 7 12
108 74 56 30,000 5/5 1/4 RMT 3 x 7.5# 8 14